Engineering Analysis · Closed
THROTTLE STICKING CLOSED
Manufacturer: General Motors, LLC
What NHTSA is examining
This investigation involves the general motors corporation (gm)throttle body (tb) utilized in model year (my) 1999-2002 silverado, sierra, tahoe, suburban, avalanche and yukon (subject vehicle(s)) with 4.8l, 5.3l, and 6.0l engines. The tb valve may intermittently stick in a closed position.in such a situation, an operator may apply additional accelerator pedal force to increase engine speed.the application of additional accelerator pedal force, to open a stuck throttle valve, may open the throttle valve more than intended and, in turn, accelerate the engine and vehicle more than intended and reasonably expected by the driver.on august 1, 2002, the office of defects investigation (odi), of the national highway traffic safety administration (nhtsa), opened this engineering analysis.the investigation revealed that two factors may cause the defect: 1) tb manufacturing process problems; and 2) accumulation of deposits (a pcv system by-product) on or around the tb throttle valve and bore.odi concludes that the tb performs in a defective manner after analyzing gm?s data submissions, and test data collected by the vehicle research and test center (vrtc).fifty-nine crashes are alleged to have occurred as a result of gm?s tb defect.the majority of the crashes involve a single vehicle, engaging in a close quarter vehicle maneuver (or low speed), and causing only minor property damage.four out of the fifty-nine crashes involve injury, and those injuries were minor.although gm?s tb is…
Vehicles under investigation
Source: NHTSA Office of Defects Investigation records, updated daily. An investigation is not a determination that a defect exists; many probes close without a recall.