2008–2016 Terex C5000, 2008–2016 Terex C6000, 2008–2016 Terex General 80 and 4 other models Recall: Suspension circuit can inflate the suspension air bags on the affected…
NHTSA campaign 16V154000 · Suspension · filed Mar 16, 2016 · verified Jul 30, 2026
The defect
Terex South Dakota, Inc. (Terex) is recalling certain model year 2015-2016 C5000, C6000, General 80, RMX, TM100, and TM125 aerial devices, and digger derrick lifts installed on trucks manufactured August 4, 2015, to February 16, 2016. The suspension circuit can inflate the suspension air bags on the affected vehicles if the Master/PTO switch or ignition is turned off in the cab while the boom is in the raised position. This can cause the frame to rise, lifting the outriggers from the ground.
The risk
If the outrigger lifts off the ground, causing instability of the truck, it can increase the risk of injury to the operator.
Check whether your specific vehicle is affected
Recall campaigns often cover only certain VIN ranges. Enter your VIN on the official NHTSA site to confirm whether your vehicle is included and whether the repair is still open.
Check VIN on NHTSA →The fix — what to do
Terex will notify owners, and dealers will install a second outrigger enable relay, free of charge. The recall began on April 29, 2016. Owners may contact Terex customer service at 1-800-982-8975. Terex's number for this recall is SN636.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Affected vehicles
| Make | Model | Model years |
|---|---|---|
| Terex | C5000 | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 |
| Terex | C6000 | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 |
| Terex | General 80 | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 |
| Terex | HRX | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 |
| Terex | RMX | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 |
| Terex | TM100 | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 |
| Terex | TM125 | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 |
Related recalls
More Terex C5000 recalls
- 2019–2026 Terex C4000 and 5 other models — An insufficient weld on the plate weldment may crack…
- 2022 Terex C4000 and 6 other models — A seam in the boom structure may have been improperly…
- 2015–2018 Terex C4000 and 3 other models — Welds between the coupler and hex shaft may be undersized…
- 2008 Terex C4000 and 4 other models — TEREX TELELECT, INC
Other campaigns involving Terex vehicles
- 2025 Terex HR40 and 5 other models — Control valve may have been assembled with an incorrect…
- 2012–2025 Altec Aerial Device and 3 other models — Cable step wire rope assembly may be improperly secured…
- 2023–2024 Terex TL-Series and 1 other model — Jib extension hydraulic cylinder rod may have a weak weld…
Source: NHTSA recall database, campaign 16V154000 (manufacturer number SN636). Data last verified Jul 30, 2026.