Preliminary Evaluation · Closed
Master Cylinder External Leak
Manufacturer: Ford Motor Company
This investigation led to a recall
NHTSA links this probe to recall campaign 16V345000.
Read the recall: what is defective and the free fix →What NHTSA is examining
On May 23, 2016, Ford Motor Company (Ford) submitted a Defect Information Report (DIR) to NHTSA regarding a master cylinder defect that could result in loss of the front brake circuit in approximately 225,012 model year 2013 through 2014 Ford F-150 vehicles equipped with 3.5-liter GTDI engines and built at the Dearborn Truck Plant from August 1, 2013 through August 22, 2014; and the Kansas City Assembly Plant from August 1, 2013 through August 31, 2014 (NHTSA Recall #16V-345, Ford Recall #16S24).Ford indicated that the rearmost cup seal in the brake master cylinder may roll, resulting in leakage from the brake fluid reservoir to the brake booster.According to Ford's DIR, Depending on the amount of brake fluid loss from the brake master cylinder into the brake booster, the driver will experience an audible chime, message center alert, red brake warning light in the instrument cluster and may begin to experience a change in brake pedal travel and feel.In the event that a loss of brake fluid is substantial enough to reduce brake function to the front wheels, the driver may experience longer pedal travel, increased pedal effort, and extended stopping distance, increasing the risk of a crash.Full braking function would remain in the rear wheel brake circuit.Ford's recall will replace the master cylinder and, if the master cylinder is leaking, also replace the brake booster.Seventy-three (73) of the complaints received by ODI contained vehicle identification number (VIN)…
Vehicles under investigation
Source: NHTSA Office of Defects Investigation records, updated daily. An investigation is not a determination that a defect exists; many probes close without a recall.