Friday, August 7, 2026
RecallGazette

Vehicle problems, recalls & safety intelligence

Preliminary Evaluation · Closed

Inappropriate autonomous braking

Action number
PE13024
Opened
Jun 25, 2013
Closed
Nov 4, 2013
Outcome
Recall 13V500000

Manufacturer: Honda (American Honda Motor Co.)

This investigation led to a recall

NHTSA links this probe to recall campaign 13V500000.

Read the recall: what is defective and the free fix →

What NHTSA is examining

In a letter dated October 31, 2013, Honda Motor Company (Honda) submitted a recall notice to NHTSA's Office of Defects Investigation describing a defect in the Vehicle Stability Assist (VSA) system in approximately 344,187 model year (MY) 2007 and 2008 Honda Odyssey vehicles produced from August 8, 2006 through September 8, 2008 (NHTSA Recall 13V-500, Honda Recall JC5).The report describes a defect condition caused by a combination of VSA system components and software that is unique to the MY 2007-2008 Honda Odyssey vehicles.The condition may result in unexpected brake application by the VSA system with no brake lamp illumination.The braking forces resulting from the condition can approach the maximum braking capability of the vehicle.Honda's investigation determined that (1) if the yaw rate sensor off-set exceeds a certain value, (2) the sensor calibration is not completed before the vehicle starts moving after start-up, and (3) the vehicle is driven in a specific manner; the VSA system may build hydraulic pressure in the brake system resulting in heavy, unexpected braking without the driver applying the brake pedal.Honda estimates that the parts necessary to correct this condition will not be available until March 2014.Pending part availability, Honda will send interim letters to affected owners including instructions to avoid the defect condition using a procedure to ensure proper VSA system calibration after each vehicle start-up, as well as instructions about what to…

Vehicles under investigation

Source: NHTSA Office of Defects Investigation records, updated daily. An investigation is not a determination that a defect exists; many probes close without a recall.