Single Wheel End Thermal Overload

What NHTSA is examining

To date, the Office of Defects Investigation (ODI) is aware of 45 complaints and field reports related to single wheel end thermal overload events on certain model year 2012 through 2013 trucks equipped with Bendix air disc brakes.Of the 45 complaints, 15 allege the thermal overload condition resulted in a fire.However, because the severity is low in all reported incidents, it is difficult to accurately quantify the number of fire incidents as opposed to those incidents where a fire related phenomenon was observed (such as smoke, which may sometimes be confused with the normal off-gassing of brake pad binder resins) or where brake system components simply suffered heat damage due to the thermal overload condition.In all reported incidents, heat related damage was apparently contained to the wheel end itself.Heat affected components typically included the brake caliper, pads, rotor, hub cap, anti-lock braking system (ABS) sensor wire and wheel torque indicators.In only three incidents did someone apply a fire extinguishing agent to address the concern and in all three cases it was a portable handheld fire extinguisher that was discharged.All other reported fire incidents were apparently self-extinguishing.In the most severe fire incident, the adjacent tire did not catch fire, the brake caliper did not have an orange or red color as is typical when a thermal overload event occurs, the black caliper paint sustained some heat damage, the caliper tappet boots had the typical…

Vehicles under investigation