Friday, August 7, 2026
RecallGazette

Vehicle problems, recalls & safety intelligence

Preliminary Evaluation · Closed

Engine compartment fire

Action number
PE12010
Opened
Mar 28, 2012
Closed
Jul 19, 2012
Outcome
Recall 12V288000

Manufacturer: General Motors, LLC

This investigation led to a recall

NHTSA links this probe to recall campaign 12V288000.

Read the recall: what is defective and the free fix →

What NHTSA is examining

In a June 21, 2012 letter to NHTSA, General Motors LLC. (GM) submitted a Defect Information Report (DIR) identifying a defect in approximately 413,148 model year (MY) 2011 through 2012 Chevrolet Cruze vehicles manufactured from October 2, 2009 through May 31, 2012 (Recall 12V-288). According to GM, engine oil change procedures can result in spilling or dripping of oil on the engine shield.Also, manual transmission vehicles with a completely worn clutch may cause hydraulic fluid to be expelled from the clutch housing vent hole.If oil, debris or the burning hydraulic fluid contacts hot engine or exhaust system surfaces, and the engine shield, the shield may ignite and burn, leading to a possible engine compartment or vehicle fire.GM and its engine shield supplier, Hanwha, modified the engine shield to address factors that may contribute to engine compartment fire. The redesigned shields were completely implemented in production vehicles by June 2012.The Office of Defects Investigation (ODI) analyzed complaint data provided by GM as well as complaints submitted to ODI from consumers. In total, there were 25 unique Chevrolet Cruze reports indicating hot surface ignition due to engine oil or hydraulic fluid contacting hot manifold, exhaust surfaces and the engine shield.Four additional fires were identified that resulted from other or unknown causes, including 1 attributed to a missing oil filler cap.Three fires of unknown cause all involved vehicles equipped with 1.4L L4…

Vehicles under investigation

Source: NHTSA Office of Defects Investigation records, updated daily. An investigation is not a determination that a defect exists; many probes close without a recall.