Inability to shift gears on acceleration

What NHTSA is examining

The Office of Defects Investigations (ODI) analyzed complaint data provided by Ford as well as complaints submitted to ODI from consumers.In total, there were 364 unique reports indicating various shift quality issues while driving.Ford identified several factors that may contribute to shift quality concerns in the subject vehicles, including cold transmission, clutch stay-out at high engine speeds, gear clash or grinding, and gradual loosening of clutch plate bolts in some early production vehicles.The largest percentage of complaints indicated higher than expected shift efforts in cold ambient temperatures.These complaints were related to transmission fluid viscosity and the higher shift efforts resolved themselves with the drivetrain warming.Ford published technical service bulletin TSB 11-3-18 to inform technicians that a lower viscosity fluid was available for use to address the cold shift issues.The clutch stay-out condition typically occurs at engine speeds greater than 4000 rpm.It does not prevent the selection of any gear, but may delay clutch re-engagement depending on how long the driver maintains the higher engine speed.Ford identified rotating inertia of the clutch components as the root cause and replacement clutch pedal parts were made available under Ford TSB 10-19-4.A number of reports alleged increasing difficulty selecting gears along with gear clash or grinding.Grinding or notchy gear shifts may be caused by gradual loosening of clutch plate fasteners…

Vehicles under investigation