Engineering Analysis · Closed
Seat Belt Webbing Failure
Manufacturer: Volkswagen Group of America, Inc.
This investigation led to a recall
NHTSA links this probe to recall campaign 20V724000.
Read the recall: what is defective and the free fix →What NHTSA is examining
In December 2017, NHTSA conducted two (2) New Car Assessment Program (NCAP) tests on the Model Year (MY) 2018 Volkswagen (VW) Tiguan. Both tests were 35mph full frontal impacts into a rigid barrier with a 50th percentile male dummy seat-belted in the driver position and a 5th percentile female seat-belted in the right front passenger position. The tests were conducted on December 8, 2017, at MGA Research Corp. (MGA) in Wisconsin and December 13, 2017, at the Transportation Research Center (TRC) of Ohio.During both crash tests, the driver seat belt webbing completely separated at the point where the webbing loops through the Crash Locking Tongue (CLT). In both NCAP tests, the dummy injury criteria requirements, as set forth in Federal Motor Vehicle Safety Standard (FMVSS) 208, were met with one exception. The chest deceleration G force requirement was exceeded in the test conducted at TRC. The FMVSS 208 injury criteria requirement for the chest deceleration is 60 Gs and it was measured at 67 Gs in the test conducted at TRC. It should be noted, FMVSS 208 does not include a requirement that the seat belt webbing remain intact during a frontal collision to comply with the standard. Compliance with the standard is based on the dummy injury criteria.Further, the Agency has conducted NCAP testing with no substantial protocol changes for over forty (40) years. This includes tests conducted prior and subsequent to the subject NCAP tests. During that time there has not been a similar…
Vehicles under investigation
Source: NHTSA Office of Defects Investigation records, updated daily. An investigation is not a determination that a defect exists; many probes close without a recall.