Engineering Analysis · Closed
Vehicle Stability Assist Malfunction
Manufacturer: Honda (American Honda Motor Co.)
This investigation led to a recall
NHTSA links this probe to recall campaign 13V092000.
Read the recall: what is defective and the free fix →What NHTSA is examining
On March 14, 2013, American Honda Motor Co., Inc. (Honda) submitted a Defect Information Report to NHTSA identifying a defect in the Vehicle Stability Assist (VSA) system in approximately 183,576 model year (MY) 2005 Honda Pilot, Acura RL and MY 2005-2006 Acura MDX vehicles (NHTSA Recall No 13V-092).The population and failure counts provided pertain only to the MY 2005 Honda Pilots that were the subject of this investigation.Honda's recall addresses two conditions in the VSA system that could result in inappropriate brake activation.The first condition is related to a manufacturing concern with a capacitor in the VSA electronic control unit (ECU) circuit board.According to Honda, VSA systems with damaged capacitors may apply a small amount of braking force for a fraction of a second, when the brake pedal is not applied by the driver.If the driver does apply the brake pedal during a malfunction, the VSA system may employ the brake assist feature rapidly increasing braking force independent of the amount of pressure the driver applies to the brake pedal (releasing the brake pedal would end the brake assist activation in such events).The second condition applied to a portion of the MY 2005 Pilot vehicles manufactured at the Alabama assembly plant that may havebeen assembled without tightening one of the VSA system electrical ground connector fasteners to the proper torque.According to Honda, an improperly torqued fastener can result in increased electrical resistance in the VSA…
Vehicles under investigation
Source: NHTSA Office of Defects Investigation records, updated daily. An investigation is not a determination that a defect exists; many probes close without a recall.